Fan Lamp Remote Controller User Manual

  1. Remotes For Lamps
  2. Fan Lamp Remote Controller Manual

Craftmade Manuals. Craftmade 44″ Tempo Ceiling Fan Manual. Eogifee Universal Ceiling Fan Remote Control and Receiver Kit Replacement of Hampton Bay Harbor Breeze Hunter KUJCE9103 FAN-11T FAN-53T 2AAZPFAN-53T Kit. Harbor Breeze Mazon 44-in Brushed Nickel Flush Mount Indoor Ceiling Fan with Light Kit and Remote (3-Blade) Check Price at. Minka-Aire Manuals. Eogifee Universal Ceiling Fan Remote Control and Receiver Kit Replacement of Hampton Bay Harbor Breeze Hunter KUJCE9103 FAN-11T FAN-53T 2AAZPFAN-53T Kit. Harbor Breeze Mazon 44-in Brushed Nickel Flush Mount Indoor Ceiling Fan with Light Kit and Remote (3-Blade) Check Price at Amazon. View and Download Hunter UNIVERSAL FAN AND LIGHT REMOTE CONTROL 27184 owners and installation manual online. Universal Fan and Light Remote Control, Hand-Held Remote and Wall Cradle. UNIVERSAL FAN AND LIGHT REMOTE CONTROL 27184 Remote Control pdf manual download. Also for: 27188. Before installing the Universal Remote Control, use the pull chains to set the fan speed to HIGH and the light to ON. Be sure power is OFF before proceeding with installation. Choose the hanging system that most closely resembles the one used by your fan. Get free 2-day shipping on qualified Remote Control Included, Ceiling Fans products or buy Lighting department products today with Buy Online Pick Up in Store. Programming a Ceiling Fan with Dip Switches. Most ceiling fan remote controls have small switches called dip switches. These switches are located under the battery cover on the remote control and also located on the receiver (depending on the age of fan as some fans do not have a typical receiver).The receiver is located in the top portion of the fan itself.

Universal 3 speed ceiling fan remote, Installation or or or, Wiring

Advertising

www.HunterFan.com

1.888.830.1326

Model 99121

Universal 3 Speed

Ceiling Fan Remote

Installation

OR

OR

OR

Remove the canopy. If uncertain
how to remove it, reference the fan’s
owner’s manual. With wiring exposed,
it may be helpful to note existing wire
connections or take a digital photo for
reference. Remove the wire connectors
that connect the wires from the outlet
box to the fan, leaving the grounding
wires connected.

Before installing the
Universal Remote Control
Receiver, use the pull chains
to set the fan speed to HIGH
and the light to ON. Be
sure power is OFF before
proceeding with installation.

Choose the hanging system that most closely resembles the one used by your fan and install the receiver as shown and wire as directed.

Note: Some fans may have considerable excess lead wire. For easier canopy installation, cut the excess wire, leaving a minimum of 8” remaining. Re-strip the fan lead wires 1/2”. Place remaining excess
wire into the ceiling electrical box. The bracket and fan must remain properly grounded.

You may have installation issues if the fan is installed on an angled ceiling. For assistance, call 1-888-830-1326.

Ceiling

Plate

Receiver

Canopy

Receiver

Canopy

Ceiling

Fan Lamp Remote Controller User Manual

Bracket

Receiver

Fan Body

Cable Tie

For low profile fans, the receiver should

be secured to the ceiling bracket with a

cable tie.

Receiver

Canopy

M0059-01 • 01/14/14 • © Hunter Fan Company

Turn

Pow

er

OFF

If you are installing multiple remote-controlled fans

on the same circuit breaker,

you may need to perform a few extra steps to prevent

interference or faulty operation of your remote controls.

Go to www.HunterFan.com/FAQs and click “How do I properly

install multiple remote-controlled fans?” for more information.

Wiring

CONNECT WIRES FROM RECEIVER TO FAN - Using the orange wire connectors, connect the blue wire from the
receiver to the blue wire (or possibly black with white stripe wire) from the fan. Connect the yellow wire from the
receiver to the black wire from the fan.

If you’re uncertain about wire colors or connections, please contact a qualified electrician.

Fan lamp remote controller user manual pdf

CONNECT WIRES FROM RECEIVER AND FAN TO WIRES FROM OUTLET BOX - Using the orange wire connectors,
connect the black wire (ungrounded) from the ceiling to the black wire from the receiver. Connect the white wire
(grounded) from the ceiling to both the white wire from the receiver and the white wire from the fan.

Remotes For Lamps

AFTER ALL WIRES ARE CONNECTED and secured with wire connectors, re-install the canopy.

Turn the splices upward and push them carefully back through the hanger bracket

into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

To avoid possible electrical shock, before installing or servicing your fan, disconnect

the power by turning off the circuit breakers to the outlet box and associated wall
switch location. If you cannot lock the circuit breakers in the off position, securely

fasten a prominent warning device, such as a tag, to the service panel.

FRO

M CEILING

FR

OM RECEIVER

black

blue

yellow

blue

FROM FAN

FR

OM R

ECEIVER

black

white

white (grounded)

black (ungrounded)

white

FROM FAN

Advertising
Popular Brands
Popular manuals

Universal 3 speed ceiling fan remote, Installation wiring or or or, Fro m ceiling fr om receiver

Advertising

www.HunterFan.com

1.888.830.1326

Model 99119

Universal 3 Speed

Ceiling Fan Remote

Installation

Wiring

OR

OR

OR

Remove the canopy. If uncertain
how to remove it, reference the fan’s
owner’s manual. With wiring exposed,
it may be helpful to note existing wire
connections or take a digital photo for
reference. Remove the wire connectors
that connect the wires from the outlet
box to the fan, leaving the grounding
wires connected.

CONNECT WIRES FROM RECEIVER TO FAN - Using the orange wire connectors, connect the blue wire from the
receiver to the blue wire (or possibly black with white stripe wire) from the fan. Connect the yellow wire from the
receiver to the black wire from the fan.

Fan Lamp Remote Controller Manual

If you’re uncertain about wire colors or connections, please contact a qualified electrician.

CONNECT WIRES FROM RECEIVER AND FAN TO WIRES FROM OUTLET BOX - Using the orange wire connectors,
connect the black wire (ungrounded) from the ceiling to the black wire from the receiver. Connect the white wire
(grounded) from the ceiling to both the white wire from the receiver and the white wire from the fan.

AFTER ALL WIRES ARE CONNECTED and secured with wire connectors, re-install the canopy.

Choose the hanging system that most closely resembles the one used by your fan and install the receiver as shown and wire as directed.

Note: Some fans may have considerable excess lead wire. For easier canopy installation, cut the excess wire, leaving a minimum of 8” remaining. Re-strip the fan lead wires 1/2”. Place remaining excess
wire into the ceiling electrical box. The bracket and fan must remain properly grounded.

You may have installation issues if the fan is installed on an angled ceiling. For assistance, call 1-888-830-1326.

Ceiling

Plate

Receiver

Canopy

Receiver

Canopy

Ceiling

Bracket

Receiver

Fan Body

Cable Tie

For low profile fans, the receiver should

be secured to the ceiling bracket with a

cable tie.

Receiver

Canopy

Turn the splices upward and push them carefully back through the hanger bracket

into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

To avoid possible electrical shock, before installing or servicing your fan, disconnect

the power by turning off the circuit breakers to the outlet box and associated wall
switch location. If you cannot lock the circuit breakers in the off position, securely

fasten a prominent warning device, such as a tag, to the service panel.

FRO

M CEILING

FR

OM RECEIVER

black

blue

yellow

blue

FROM FAN

M0058-01 • 01/14/14 • © Hunter Fan Company

Turn

Pow

er

OFF

Before installing the
Universal Remote Control
Receiver, use the pull chains
to set the fan speed to HIGH
and the light to ON. Be
sure power is OFF before
proceeding with installation.

If you are installing multiple remote-controlled fans

on the same circuit breaker,

you may need to perform a few extra steps to prevent

interference or faulty operation of your remote controls.

Go to www.HunterFan.com/FAQs and click “How do I properly

install multiple remote-controlled fans?” for more information.

FR

OM R

ECEIVER

black

white

white (grounded)

black (ungrounded)

white

FROM FAN

Advertising
Popular Brands
Popular manuals